材料失效分析
龚嶷
发布时间: 2013-03-04   浏览次数: 810

个人信息:

姓名:龚嶷

联系电话:021-65642391 (办公室)

Email: gongyi@fudan.edu.cn

职称:青年副研究员


教育经历:

2007.9-2012.6 工学博士  复旦大学材料科学系  材料物理与化学专业

2003.9-2007.6 理学学士  复旦大学材料科学系  材料化学专业


主要研究方向:

l材料失效分析

l聚合物材料老化评估


教学工作:

《工程材料》(本科生专业选修课)主讲

《核电材料老化与管理》(研究生专业选修课)主讲


近几年发表的国际期刊论文:

  1. Gong Y, Hu S-M, Yang X-L, et al. Comparative study on degradation of ethylene-propylene rubber for nuclear cables from gamma and beta irradiation. Polymer Testing, 2017, 60 102-9.

  2. Gong Y, Fei J-L, Tang J, et al. Failure analysis on abnormal wear of roller bearings in gearbox for wind turbine. Engineering Failure Analysis, 2017, 82 26-38.

  3. Yang Z-G, Gong Y. Chapter 16 - Failure analysis of heat exchanger tubes in petrochemical industry: Microscopic analysis approach. Handbook of Materials Failure Analysis with Case Studies from the Oil and Gas Industry. Butterworth-Heinemann. 2016: 329-52.

  4. Gong Y, Yang ZG, Meng XH. Failure analysis of one peculiar 'Yin-Yang' corrosion morphology on heat exchanger tubes in purified terephthalic acid (PTA) dryer. Engineering Failure Analysis, 2013, 31 203-10.

  5. Gong Y, Yang ZG. Fracture failure analysis of automotive accelerator pedal arms with polymer matrix composite material. Composites Part B: Engineering, 2013, 53 103-11.

  6. Yang ZG, Gong Y, Yuan JZ. Failure analysis of leakage on titanium tubes within heat exchangers in a nuclear power plant. Part I: Electrochemical corrosion. Materials and Corrosion, 2012, 63 (1): 7-17.

  7. Gong Y, Yang ZG, Yuan JZ. Failure analysis of leakage on titanium tubes within heat exchangers in a nuclear power plant. Part II: Mechanical degradation. Materials and Corrosion, 2012, 63 (1): 18-28.

  8. Gong Y, Yang ZG, Yang FY. Heat strength evaluation and microstructures observation of the welded joints of one China-made T91 steel. Journal of Materials Engineering and Performance, 2012, 21 (7): 1313-9.

  9. Gong Y, Yang ZG, Wang YF. Impact simulation on ductile metal pipe with polymer coating by a coupled finite element and meshfree method. Journal of Failure Analysis and Prevention, 2012, 12 (3): 267-72.

  10. Gong Y, Yang ZG. Corrosion evaluation of one dry desulfurization equipment - Circulating fluidized bed boiler. Materials and Design, 2011, 32 (2): 671-81.

  11. Gong Y, Yang C, Yao C, et al. Acidic/caustic alternating corrosion on carbon steel pipes in heat exchanger of ethylene plant. Materials and Corrosion, 2011, 62 (10): 967-78.

  12. Gong Y, Cao J, Ji LN, et al. Assessment of creep rupture properties for dissimilar steels welded joints between T92 and HR3C. Fatigue and Fracture of Engineering Materials and Structures, 2011, 34 (2): 83-96.

  13. Cao J, Gong Y, Yang ZG. Microstructural analysis on creep properties of dissimilar materials joints between T92 martensitic and HR3C austenitic steels. Materials Science and Engineering A, 2011, 528 (19-20): 6103-11.

  14. Cao J, Gong Y, Zhu K, et al. Microstructure and mechanical properties of dissimilar materials joints between T92 martensitic and S304H austenitic steels. Materials & Design, 2011, 32 (5): 2763-70.

  15. Cao J, Gong Y, Yang ZG, et al. Creep fracture behavior of dissimilar weld joints between T92 martensitic and HR3C austenitic steels. International Journal of Pressure Vessels and Piping, 2011, 88 (2-3): 94-8.

  16. Gong Y, Zhong J, Yang ZG. Failure analysis of bursting on the inner pipe of a jacketed pipe in a tubular heat exchanger. Materials and Design, 2010, 31 (9): 4258-68.

  17. Ji LN, Gong Y, Yang ZG. Failure investigation on copper-plated blind vias in PCB. Microelectronics Reliability, 2010, 50 (8): 1163-70.

  18. Gu YS, Gong Y, Yang ZG. Hydrogen embrittlement on high-speed stainless steel belts used for tin plating chip lead frame. Journal of Failure Analysis and Prevention, 2010, 10 (5): 399-407.

  19. Gong Y, Cao J, Meng XH, et al. Pitting corrosion on 316L pipes in terephthalic acid (TA) dryer. Materials and Corrosion, 2009, 60 (11): 899-908.